Chuk907 Posted December 20, 2006 Report Posted December 20, 2006 (edited) I've got this so far but when i go to extrude it just stays the same i've selected edit then the object then extrude then i click the arrows it just stay's same any one help please??? cheers, chucky Edited December 20, 2006 by Chuk907
Haadee#525 Posted December 20, 2006 Report Posted December 20, 2006 i think you have selected wrong thing and then you did extrude because that little box is extruded
pazza Posted December 20, 2006 Report Posted December 20, 2006 the way i do it is hover over the selected edges and a little symbol appears. then you just drag it to half the width of the car. i don't bother with typing a number in the little extrude box. btw is that a pulsar?
pazza Posted December 20, 2006 Report Posted December 20, 2006 heres the little symbol. lol i had to take a pic of the screen with my camera coz print screen hides the cursor!
Chuk907 Posted December 20, 2006 Author Report Posted December 20, 2006 Naa, The cars a Nissan Sunny GTIR
Marcy_Boi#133 Posted December 20, 2006 Report Posted December 20, 2006 Isn't a Pulsar basically a Sunny on Steroids anyway?
vivadave Posted December 20, 2006 Report Posted December 20, 2006 I had the same problem as you, everything fine till it came to extruding bit, have you got to the bit where you have to place the box to make the opening for the rear window, that seemed like a head ache too, sorry to crash your post but i'll be looking out on the replies you get.... Vivadave169....
mcrew Posted December 20, 2006 Report Posted December 20, 2006 Isn't a Pulsar basically a Sunny on Steroids anyway? My mate would beat you to death with the chocolate cogged gearbox out of his Pulsar if he heard you say that! Even though it is just a Sunny with a Huge turbo, and intercooler.......and 4 WD
Rikard Posted December 20, 2006 Report Posted December 20, 2006 Isn't a Pulsar basically a Sunny on Steroids anyway? My mate would beat you to death with the chocolate cogged gearbox out of his Pulsar if he heard you say that! Even though it is just a Sunny with a Huge turbo, and intercooler.......and 4 WD Those Pulser/Sunny's are actually VERY fast, down Brighton Speed trials there was one that beat a couple of Ferrari's over quarter of a mile. That seems fast to me
dangerous damo Posted December 20, 2006 Report Posted December 20, 2006 just to clarify- the sunny is the uk version, the pulsar is the japanese version.
erik Posted December 20, 2006 Report Posted December 20, 2006 Isn't a Pulsar basically a Sunny on Steroids anyway? My mate would beat you to death with the chocolate cogged gearbox out of his Pulsar if he heard you say that! Even though it is just a Sunny with a Huge turbo, and intercooler.......and 4 WD Those Pulser/Sunny's are actually VERY fast, down Brighton Speed trials there was one that beat a couple of Ferrari's over quarter of a mile. That seems fast to me That example was probably tuned within an inch of its life though...
Rikard Posted December 20, 2006 Report Posted December 20, 2006 (edited) That example was probably tuned within an inch of its life though... It wasn't tuned that much, but there was a Skyline down there, i saw the same car at the Brighton motor show and got chatting to the guy. He had spent £100,000 on the engine alone! The Skyline had over 1,000 horsepower! It was a joy to behold, seeing it on the line, revving it into the red line, then letting the clutch fly up, unleashing a stampede of angry horses, wheel spinning in 1st, 2nd, and 3rd gear plus a little puff in 4th. Certainly was impressive. And all road legal, crazy! Edited December 20, 2006 by Rikard
erik Posted December 20, 2006 Report Posted December 20, 2006 That example was probably tuned within an inch of its life though... The Skyline had over 1,000 horsepower! Imagine the cost to insure that!
sashjag Posted December 20, 2006 Report Posted December 20, 2006 That example was probably tuned within an inch of its life though... The Skyline had over 1,000 horsepower! Is that the 1 where 1 of the lights at the front is an Air intake?? And i watched this program on men and motors before the porn,a nd a toyota supra went over 200 mph and the windows were bending as he got to 180 mph. and snapped in his face as he reached 210 mph
mcrew Posted December 20, 2006 Report Posted December 20, 2006 Skylines, Pulsars. Thats Nuffin! Back in the days when I had a 1,275 GT Mini...................OK, I'll get me coat!
Ryano Posted December 21, 2006 Report Posted December 21, 2006 (edited) http://www.youtube.com/watch?v=0HGE6qfBvvw beat that and mcrew would drive one Edited December 21, 2006 by Ryano
Nick M48 Posted December 21, 2006 Report Posted December 21, 2006 (edited) i've selected edit then the object then extrude then i click the arrows it just stay's same If you've followed these steps from the tutorial and those before and after exactly, then it will all work fine... The next step is to extrude some edges, so that's what we'll do now. In the "Edit Mesh" menu select "Edge" as circled in the picture below. Scroll down the "Edge" menu and click "Select Open Edges" This will select all the open edges on your model. We don't want to extrude the window apertures or the pillars at this stage so we need to de-select them. Hold down "Alt" whilst clicking on the edges we want to de-select to de-select them. Edited December 21, 2006 by Nick M48
Sparky961 Posted December 21, 2006 Report Posted December 21, 2006 Skylines, Pulsars. Thats Nuffin! Back in the days when I had a 1,275 GT Mini...................OK, I'll get me coat! Back in the day? What you mean back in the day lol. I have a 1275 GT Mini just now. Set of revo's to go on it in a few days and get it nicely polished for crimbo:) cheers sparky
Chuk907 Posted December 21, 2006 Author Report Posted December 21, 2006 i've selected edit then the object then extrude then i click the arrows it just stay's same If you've followed these steps from the tutorial and those before and after exactly, then it will all work fine... The next step is to extrude some edges, so that's what we'll do now. In the "Edit Mesh" menu select "Edge" as circled in the picture below. Scroll down the "Edge" menu and click "Select Open Edges" This will select all the open edges on your model. We don't want to extrude the window apertures or the pillars at this stage so we need to de-select them. Hold down "Alt" whilst clicking on the edges we want to de-select to de-select them. I've done that but then it won't extrude
Chuk907 Posted December 21, 2006 Author Report Posted December 21, 2006 Got it Extruded and the bk window in.
ACE71 Posted December 22, 2006 Report Posted December 22, 2006 That example was probably tuned within an inch of its life though... The Skyline had over 1,000 horsepower! Imagine the cost to insure that! They are pony's not horses
Rikard Posted December 22, 2006 Report Posted December 22, 2006 They are pony's not horses very very strong pony's then!
Recommended Posts