dangerous damo Posted January 19, 2007 Report Posted January 19, 2007 im currently painting a replica skin of justin woolners 2001 firecracker silver cloud and im stuck because i need pis of the passenger side, bonnet and boot. can anyone help please. attached are what ive done so far plus the only photo i have. [attachmentid=12896] [attachmentid=12897]
*Dippy400* Posted January 19, 2007 Report Posted January 19, 2007 Not picking mate put the red cut off looks more orange and it goes right to the bottomw by the front wheel instead of half way down the car
hotrod331 Posted January 20, 2007 Report Posted January 20, 2007 also maybe try compacta bt for the "BAD NEWS" and the numbers as i think that its alot more like the font then youve used,also the checkers are silver and go past the piller... not pulling it down welldone just trying to help!
Splodge Posted January 21, 2007 Report Posted January 21, 2007 Hi Damo, only just notice this thread. Few pointers , (please don't take these the wrong wrong way) that i can see comparing oringal to your efforts - Orange and White are seperated by line that goes from front of sill up to to middle of back piller and not from middle of the sill to the middle of the back piller - front grill was just piece of steal and not grill as shown on yours but i guess that personal preference - Front bumper was grey and not white as shown on yours and finally - Bad News on passanger side ain't one straght diagonal line it is two plus a horizontal section in the middle. [attachmentid=12922] [attachmentid=12921] [attachmentid=12920] [attachmentid=12923] Sorry i don't have a picture of the bonnet but do have a picture of it before dan klyn got his hands on it. [attachmentid=12925]
dangerous damo Posted January 21, 2007 Author Report Posted January 21, 2007 epic alex ta for the pics. ive also noticed the model we have for heat is either an earlier or later version of the cloud as the lights are like a silver shadow.
Recommended Posts