stig727 Posted January 1, 2009 Report Posted January 1, 2009 im buildin a car following nick m's guide. i have mirrored the car and when i go to weld the verts down the middle i get a box saying "no vertices within weld threshold" this is with 0.05 in the box where it says weld like nick m's guide says. am i meant to get the message above or do i have to change something?
andy2oo7 Posted January 1, 2009 Report Posted January 1, 2009 im buildin a car following nick m's guide. i have mirrored the car and when i go to weld the verts down the middle i get a box saying "no vertices within weld threshold" this is with 0.05 in the box where it says weld like nick m's guide says. am i meant to get the message above or do i have to change something? try clicking Collapse rather than weld, it does the same thing but make sure that you dont select a vert on the other sid eof the car or you will end up folding it up
stig727 Posted January 1, 2009 Author Report Posted January 1, 2009 does that mean that i have to select the two that want welding two at a time?
andy2oo7 Posted January 1, 2009 Report Posted January 1, 2009 does that mean that i have to select the two that want welding two at a time? Well aye, i dont ever collapse or weld more than 2 at a time, takes longer but least its getting done right
The London Allstar Posted January 1, 2009 Report Posted January 1, 2009 Yep either that or make the thresh hold bigger. Your getting that message because the vertex are too further apart than the 0.005 measurement you put in. (or at least thats my understanding of it) So just make the number high, try 0.010 for eg Or just do as Andy said which is the method i use. The target welding is also a good method
Haadee#525 Posted January 1, 2009 Report Posted January 1, 2009 mirror it - convert to editable poly automatically welded (at least here on max 7)
stig727 Posted January 1, 2009 Author Report Posted January 1, 2009 i think thats where i went wrong, didnt convert it to editable mesh / poly.
Recommended Posts