Vixtro Posted January 23, 2009 Report Posted January 23, 2009 This isn't a huge problem but one that is slightly hindering my rFactor enjoyment and my ability clear out the way of other drivers quickly if I spin out/crash etc. The problem is that I use an Xbox 360 controller and to shift gears I use 2 buttons just like I do in the Heat mods which works fine for them. The problem with rFactor is that if I want to shift it into reverse, I have to shift it in to neutral first, the same applies if I want to get into 1st gear, I have to shift it into neutral again first. It's like some sort of stupid substitute for a clutch since auto clutch is on. Is there anyway to shift between reverse and the 1st gear without having to go into neutral?
The London Allstar Posted January 23, 2009 Report Posted January 23, 2009 Thats how it is for everyone. I use a steering wheel with the flappy paddle things and you have to go into nuetral before you can get either first or reverse. If you want reverse the best thing to do is just hammer the button cos you can go any lower than reverse, i do the same for first hammer it down then click it up twice to get first
Hutch#331 Posted January 23, 2009 Report Posted January 23, 2009 Unassign the neutral button then you can change direct from 1st to reverse
Vixtro Posted January 23, 2009 Author Report Posted January 23, 2009 Unassign the neutral button then you can change direct from 1st to reverse Cheers Hutch, such a simple fix but one I would never have thought of.
Recommended Posts