The London Allstar Posted July 8, 2008 Report Posted July 8, 2008 Hi lads, have noticed this a few times with the megane mod, my whoel dashboard disapears when using the incar camera. I was playing F1 stockcars on shale today using the ASmith chassis for the steeringwheel to disapear after about 2 seconds. Any ideas?
mini683 Posted July 8, 2008 Report Posted July 8, 2008 same Allstar i was playing rfactor aswell and i put the inboard veiw on and it looked exactly the same as the pic above. Is there a way to stop this?
The London Allstar Posted July 8, 2008 Author Report Posted July 8, 2008 It never used to do it, its only been in the last 2 weeks in the Meganes, and today in the stockcars
splinter Posted July 8, 2008 Report Posted July 8, 2008 Never heard of the problem before Many of the interior parts have different mesh GMT files, such as the body, dash, dials, wheel, etc. Sounds like a game problem if its doing it on the Megane and Smith cars. Possibly a recently installed new mod has changed your LOD (detail) settings One thing you could try is going to your user folder and open your personel PLR setting file in notepad (worth backing this up at this point before you change too much) In the display options you can change the cockpit vibration, head movement, yaw movement look ahead angle etc. Try taking a look to see if setting some of these figures down to 0.000 will help. If its a LOD (interior camera detail) problem, this can be fixed in a similar way to the above, but in the CAM files in each vehicle folder, ie LOD multiplier may be set at 1.000. You could increase it to 2 or 3 until the problem is fixed. DO NOT increase it too much as it will cause much heavier loads on your system. PS These will not cause mismatches, as you're not changing the vehicles physics. If all this sounds too complicated then dont attempt to adjust anything Mini are you sure you have steering wheel set to show in the game menu? (sorry if thats obvious to you, but am just checking)
The London Allstar Posted July 9, 2008 Author Report Posted July 9, 2008 If its a LOD (interior camera detail) problem, this can be fixed in a similar way to the above, but in the CAM files in each vehicle folder, ie LOD multiplier may be set at 1.000. You could increase it to 2 or 3 until the problem is fixed. DO NOT increase it too much as it will cause much heavier loads on your system. Spot on splinter, The multiplier was set to 2.000, so i changed it up to 3.000 and its working fine! Cheers
Recommended Posts