stig727 Posted January 21, 2009 Report Posted January 21, 2009 Heres some progress on the mk2 escort for ssc i was modeling. ive got it partialy mapped with template, just need to do roof and inside bits etc. any opinions will be taken into consideration. comments /constructive critisism welcome.
crewie Posted January 21, 2009 Report Posted January 21, 2009 The back bumper should only have the lower bit of box section, not the additional 2 side/uprights and top piece. The cage behind the drivers seat should have 2 uprights and then bars running from side to side horizontaly, not cross bars as you have done. Other than that it looks good so far.
Lee Posted January 21, 2009 Report Posted January 21, 2009 looks like you have chopped the normal mk2 escort to bits.
andy2oo7 Posted January 21, 2009 Report Posted January 21, 2009 (edited) looks like you have chopped the normal mk2 escort to bits. I thinks that too lee lol, can remember reading this a while back Edited January 21, 2009 by andy2oo7
Colley Posted January 22, 2009 Report Posted January 22, 2009 looks good try making it yourself next time and not chopping up models and sticking some box around it?
stig727 Posted January 22, 2009 Author Report Posted January 22, 2009 (edited) EXCUSE ME!!!! i have made it my self. i just used some of the bits on the mk2 escort banger template to help me. Allthough i did ask boogie if it was ok to make this model as it is very similar as you have proven i dont even have the max or 3ds file for the mk2escort banger. cheers for the comments will take these into consideration. i will also need alot of help to get it in game im havent got much idea how the ssc mod works as always any help is greatly appreciated. also i havent released anything for the saphire i altered a while ago still dont know who the original modeler is..... Edited January 22, 2009 by stig727
Colley Posted January 22, 2009 Report Posted January 22, 2009 EXCUSE ME!!!! i have made it my self. i just used some of the bits on the mk2 escort banger template to help me. my point proven
stig727 Posted January 22, 2009 Author Report Posted January 22, 2009 Allthough i did ask boogie if it was ok if you have a problem then shove it colley!!! and i have created a whole new template for the ssc model. i have had comments on other forums and i think i will add some uprights between the back bumper (so it looks like a ladder).
Colley Posted January 23, 2009 Report Posted January 23, 2009 did i slate what you had done? i mearly told you to try it yourself rather than editing...some attitude?
earache Posted January 23, 2009 Report Posted January 23, 2009 I think he maybe did make that saloon model himself rather than editing the Mk2 Escort banger. Here's a pic of the banger model at a similar angle...
Chewy102 Posted January 23, 2009 Report Posted January 23, 2009 (edited) Stig, When the Mk2 was being used as a saloon, the back bumper rules were different and it was only a single bar, not double as you have. If your going for retro realism then you should change it to single bar. Chewy Edited January 23, 2009 by Chewy102
stig727 Posted January 23, 2009 Author Report Posted January 23, 2009 cheers earache, i was thinking of making more than one car file any way so i will make a couple of variations.
stig727 Posted January 23, 2009 Author Report Posted January 23, 2009 here is an update and a better angle (front isnt mapped yet). i have deleted the x bars and added two uprights (not dont horizontal bars yet). also skitzo thinks the frame should be on the outside of the body panels. what do yous think?
andy2oo7 Posted January 23, 2009 Report Posted January 23, 2009 here is an update and a better angle (front isnt mapped yet). i have deleted the x bars and added two uprights (not dont horizontal bars yet). also skitzo thinks the frame should be on the outside of the body panels. what do yous think? Have a look here mate, loads of old saloons that will give you an idea
mini683 Posted January 23, 2009 Report Posted January 23, 2009 here is an update and a better angle (front isnt mapped yet). i have deleted the x bars and added two uprights (not dont horizontal bars yet). also skitzo thinks the frame should be on the outside of the body panels. what do yous think? 3 vertical teeth on front bumper ?
stig727 Posted January 23, 2009 Author Report Posted January 23, 2009 thanks andy, just some of them look a lot like hotrods and wasnt sure. 3 vertical teeth on front bumper ? is that a problem? more or less?
mini683 Posted January 23, 2009 Report Posted January 23, 2009 (edited) thanks andy, just some of them look a lot like hotrods and wasnt sure. 3 vertical teeth on front bumper ? is that a problem? more or less? well it does if you want it to look like a saloon. Saloons usually have at least 4 or 5 teeth. Edited January 23, 2009 by mini683
Walker363 Posted January 23, 2009 Report Posted January 23, 2009 Stig I think mini is offering you advice. Not having a go.
andy2oo7 Posted January 24, 2009 Report Posted January 24, 2009 thanks andy, just some of them look a lot like hotrods and wasnt sure. 3 vertical teeth on front bumper ? is that a problem? more or less? Saloons have big steel bumpers Dont know about anyone else but i find the difference between a saloon and a hotrod easy to tell , and yes there is a good few rods and that in the gallery as its loads of pics from the 80s
stig727 Posted January 24, 2009 Author Report Posted January 24, 2009 Stig I think mini is offering you advice. Not having a go. i wasnt having ago either just asking if it was a problem. and when i was looking for pic i found quite a few hotrods is what i meant i can tell the difference.
Recommended Posts