Walker363 Posted April 3, 2009 Report Share Posted April 3, 2009 Just a few pics from bradford including a pic of the GN finish and heat 3 finish. Link to comment Share on other sites More sharing options...
Kruiz 136 Posted April 3, 2009 Report Share Posted April 3, 2009 Good pics mate just a tip though, if you assign the free cam as a button, mine is F3 although I'm not sure if that's default, probably not, you can roam around the track and position the camera where you want so you can get better positioned angles, also theres zoom in and out, pan left, right, up and down aswell as tilts, if you have a play about and look to see what buttons are assigned in your configuration you'll find them. Link to comment Share on other sites More sharing options...
Walker363 Posted April 3, 2009 Author Report Share Posted April 3, 2009 Good pics mate just a tip though, if you assign the free cam as a button, mine is F3 although I'm not sure if that's default, probably not, you can roam around the track and position the camera where you want so you can get better positioned angles, also theres zoom in and out, pan left, right, up and down aswell as tilts, if you have a play about and look to see what buttons are assigned in your configuration you'll find them. Cheers Could you show me a pic of what bits to assign. Not sure what ones your on about Link to comment Share on other sites More sharing options...
Kruiz 136 Posted April 3, 2009 Report Share Posted April 3, 2009 (edited) I'm not sure how to explain this but I'll try. Assign the highlighted line as a button. Then go down and assign all the ones that start with 'Cam' Write them down until you get used to them as there is loads. Go to a replay. Use the view you have been, but press the one I highlighted above. The camera will then stop following the cars, it will be static. Now use your assigned Cam buttons to move around, pan, zoom etc, does that make sense? Edited April 3, 2009 by Kruiz 136 Link to comment Share on other sites More sharing options...
Walker363 Posted April 4, 2009 Author Report Share Posted April 4, 2009 I'm not sure how to explain this but I'll try. Assign the highlighted line as a button. Then go down and assign all the ones that start with 'Cam' Write them down until you get used to them as there is loads. Go to a replay. Use the view you have been, but press the one I highlighted above. The camera will then stop following the cars, it will be static. Now use your assigned Cam buttons to move around, pan, zoom etc, does that make sense? Thanks Just what I was wanting to know Link to comment Share on other sites More sharing options...
Johno3 Posted April 6, 2009 Report Share Posted April 6, 2009 Good stuff again Walker Link to comment Share on other sites More sharing options...
Walker363 Posted April 6, 2009 Author Report Share Posted April 6, 2009 Good stuff again Walker Thanks I will do pics from meetings when I get the chance. Link to comment Share on other sites More sharing options...
Recommended Posts