Jump to content



Recommended Posts

Posted (edited)

After a very impressive season from the low budget driver Tim Warwick and still giving the top drivers a run for their money at any track i decided that it would be a good idea to paint his skin.  Bit of a dodgy chassis i think to have put it on but the for the job. Here are a few screenshots of it:

[attachmentid=4357]

[attachmentid=4358]

The car is downloadable HERE

post-667-1136293766.jpg

post-667-1136293791.jpg

Edited by kruiz
Posted

who's tim warwick never heard of him did he used to race a long while ago with your dad kruiz scared15.gif  rofl.gif

 

good job m8 and if your up for it i have a skin for you to do as you seem to like doing the real life skin's thumbup.gif

Posted

Yes he's being racing for a very long time even as far back as with my dad, lol with that same car (seriously!), i don't think he has ever changed makimg it probably the oldest car in BriSCA F1 that is still reguarly used.  Dispite this he is real crowd favourite because he still has push and shove with all the top drivers, he never gives up.  You've probably never heard of him as he mainly does shale meetings now.  Because of this he doesn't get many points any more, still worth watching though.  Here's a few pictures i took at NIR World Final day:

[attachmentid=4371]

[attachmentid=4372]

And just to prove he still races at regular meetings!

[attachmentid=4373]

post-667-1136313733_thumb.jpg

post-667-1136313814_thumb.jpg

post-667-1136313957.jpg

Posted

I like painting real life skins because for now i'm not racing online so i'm just adding to the competitors offline!

 

What car did you want me to paint?  I can't paint really difficult skins but i'll sure i can try it.  What did you have in mind?

Posted

sorry kruiz was tongue in cheek as i had my 1st ever outing in tim's old car [attachmentid=4379]

 

however i would like you to try and paint this if you can it is on the elwell chassis in the briusca legend s game and is the ex elwell car so should be a match  rofl.gif [attachmentid=4380]

post-589-1136320260.jpg

post-589-1136320364_thumb.jpg

Posted

Hi Crasher,

 

Yes the Elwell chassis looks quite close to that. 

I assume you want the bottom car.

I will try to paint it.  I should be able to do it.  All i'll need now is a few more pictures of it. (rear, other side and possibly bonnet?)

 

And also the template to the chassis.

Posted
Hi Crasher,

 

Yes the Elwell chassis looks quite close to that. 

I assume you want the bottom car.

I will try to paint it.  I should be able to do it.  All i'll need now is a few more pictures of it. (rear, other side and possibly bonnet?)

 

And also the template to the chassis.

 

 

hi pal  rofl.gif  that is the ex chris elwell car which is the car in the game so should be nearly spot on,if i can i'll get some pics for you fo the rear and sides as i cant remember what was on it as that was 1992 ish so the memory fades with all the knock's ask your dad lol.

Posted
Hi Crasher,

 

Yes the Elwell chassis looks quite close to that. 

I assume you want the bottom car.

I will try to paint it.  I should be able to do it.  All i'll need now is a few more pictures of it. (rear, other side and possibly bonnet?)

 

And also the template to the chassis.

 

 

hi pal  rofl.gif  that is the ex chris elwell car which is the car in the game so should be nearly spot on,if i can i'll get some pics for you fo the rear and sides as i cant remember what was on it as that was 1992 ish so the memory fades with all the knock's ask your dad lol.

 

 

darren or binny post some pics up of the car from all sides i think it was the same both sides and the bonnet is as is on the pic and i think on the back it just had me number on the boot lid.

Posted
And just to prove he still races at regular meetings!

[attachmentid=4373]

Is this the motor he's running recently. Think I remember seeing it at the Belle Vue meetings with it's distinctive wing.

Posted
And just to prove he still races at regular meetings!

[attachmentid=4373]

Is this the motor he's running recently. Think I remember seeing it at the Belle Vue meetings with it's distinctive wing.

 

Yes he uses that wing more reguarly than his 'proper' wing.

Posted
Hi Crasher,

 

Yes the Elwell chassis looks quite close to that. 

I assume you want the bottom car.

I will try to paint it.  I should be able to do it.  All i'll need now is a few more pictures of it. (rear, other side and possibly bonnet?)

 

And also the template to the chassis.

 

 

hi pal  rofl.gif  that is the ex chris elwell car which is the car in the game so should be nearly spot on,if i can i'll get some pics for you fo the rear and sides as i cant remember what was on it as that was 1992 ish so the memory fades with all the knock's ask your dad lol.

 

 

darren or binny post some pics up of the car from all sides i think it was the same both sides and the bonnet is as is on the pic and i think on the back it just had me number on the boot lid.

 

I will start work on it as soon as i can get me a templateof the lintern chassis, which is what the elwell car is called in the game.  thumbs_up.gif

Posted
And just to prove he still races at regular meetings!

[attachmentid=4373]

Is this the motor he's running recently. Think I remember seeing it at the Belle Vue meetings with it's distinctive wing.

 

Yes he uses that wing more reguarly than his 'proper' wing.

tim has to use that wing nowadays coz hes 2 tight to buy a light weight one  his old 1 puts the car overweight  rofl.gif

Posted

That's fine Binny  thumbup.gif  Both sides are the same by the look of it,  just the back panel then now.

Posted

sorry kruiz was tongue in cheek as i had my 1st ever outing in tim's old car [attachmentid=4379]

 

I never did get my crash helmet back!!!! 5.gif

 

Posted

sorry kruiz was tongue in cheek as i had my 1st ever outing in tim's old car

 

I never did get my crash helmet back!!!! 5.gif

 

not my fault you bottled it and didn't race after your 20 lap's of tickover at skeg scared15.gif  rofl.gif

 

 

do it whatever you think suit's it best m8 white or yellow whatever you call pal thumbup.gif

Posted
Yes i think your right yellow looks better.

think it would have looked a lot better as a blue as it would have matched the chassis.

 

How about turning a wheel again and see if you can make it......

 

thumbup.gif

 

 

Posted (edited)

I have just started it and have colured car.  I'm now starting the sign writing but i have stumbled at the foirst heardle.  I haven't got the font for the 407.  All is not lost if someone can maybe tell me what it is called.  However i will look around some font websites and see if i can find it.

[attachmentid=4396]

post-667-1136465120.jpg

Edited by kruiz
Posted
I have just started it and have colured car.  I'm now starting the sign writing but i have stumbled at the foirst heardle.  I haven't got the font for the 407.  All is not lost if someone can maybe tell me what it is called.  However i will look around some font websites and see if i can find it.

[attachmentid=4396]

 

 

i'll ring brian if you want and ask him  rofl.gif  not a clue mate but the back panel had the number on it in the same font and it was the complete back panel  thumbup.gif

 

is that

a sponsorship deal your offering alec  scared15.gif  rofl.gif maybe have a outing this year if i can afford the hire car cost's all in good fun and to pay a few back or just liven it up rofl.gif

Posted

don't know if this will help or not but the colour's were volkswagen beetle orange,(the old beetle not the new one)ford electric blue and the yellow was just called daytona yellow,like i say don't know if that help's as i doubt there is a paint shop on here that sell's them still thumbup.gif

and cheers for doing it and im sure it will look good and i can have a whale of a time burying dad neil and tim in my old car  rofl.gif

Posted

Kruiz...... you may have a hard time if your relying on fonts for real life skins. Most sign writers tend not to use fonts which are publiclly available, or make the thier own designs themselves, so the best way to get a close rendition of a paintjob like the one brian evans did here to is to make the graphics by hand, its long winded tracing all the shapes, but worth it at the end.

 

Posted
Kruiz...... you may have a hard time if your relying on fonts for real life skins. Most sign writers tend not to use fonts which are publiclly available, or make the thier own designs themselves, so the best way to get a close rendition of a paintjob like the one brian evans did here to is to make the graphics by hand, its long winded tracing all the shapes, but worth it at the end.

 

 

the font that is free and closest to it is probaly "STORYBOOK" try that.

Posted

come on kruiz im dying to see the finished article,know you have had probs but that should be sorted now hopefully kev has replied and you should have an email thumbup.gif

  • 2 weeks later...
Posted

i see you are now back on the forum kruiz any progress on the car mate :thumbs_up:

  • 2 weeks later...
Posted

Sorry Crasher for the delay, but i had to re-register with a different user name so now i am Kruiz 136, as opposed to Kruiz. I am not to far off being finished now, it has taken me a while longer as i have been doing my ukdirt cars for next season in between. :042:

Posted

Sorry Crasher for the delay, but i had to re-register with a different user name so now i am Kruiz 136, as opposed to Kruiz. I am not to far off being finished now, it has taken me a while longer as i have been doing my ukdirt cars for next season in between. :042:

 

 

no probs mate take your time im sure it will look good though :thumbs_up:

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use, Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..